Site to Site VPN with Remote ESC Clients

Has anyone successfully used a Site to Site VPN with remote ESC clients over the VPN.

0

Comments

7 comments
  • Hey Cliff! It looks like your post didn't come through. Can you click the "Post Actions" button in the top-left of this message, click Edit, and then just re-type out your post? That way we can all see your question! Thanks!

     

    0
    Comment actions Permalink
  • Depending on what you're asking, we do both site to site and client VPN. We have site to site with juniper srx, ubiquiti USG, and Cisco meraki routers. They all work really well

    0
    Comment actions Permalink
  • Luke thanks for your prompt response..

    The configuration is VPN Site 1, -- Server with Charter Internet about 80M down and 3 to 5M up. Site 2 -- 3 to 4 ESC Client computers. I need to be able to have my customer seamlessly connect Server to Client using two box Site to Site VPN. I am concerned about the upload bandwidth since the individuals at the across town location are already used to the response time on the Intranet Lan.

    0
    Comment actions Permalink
  • Do you have the Site to Site VPN up yet? What is your ping time from site to site (doesn't matter if VPN is established)?

    We are on a 10mbps fiber connection between the 2 building so low latency, but also small bandwidth and have no problems. To emulate more of your scenario we have multiple people that work from home from time to time with Residential internet using Client VPN (built into the computer) and they never seem to have issues. 

    0
    Comment actions Permalink
  • Got the Site to Site VPN going today. I used two Cisco RV325 routers in Gateway to Gateway mode. First test with single ESC client was impressive. Will post later after the remote site is being fully utilized.

    0
    Comment actions Permalink
  • Awesome to hear. I think it should work out fine for you guys....outside of normal latency we all experience from the interwebs :P

    0
    Comment actions Permalink
  • Thanks Luke

    0
    Comment actions Permalink

Please sign in to leave a comment.

Didn't find what you were looking for?

New post